China Factory for Sfp Dual Core - 100BASE-LX SFP 1310nm 10km Hi-Optel HSFP-03-3312S-22F module – Hi-optel
China Factory for Sfp Dual Core - 100BASE-LX SFP 1310nm 10km Hi-Optel HSFP-03-3312S-22F module – Hi-optel Detail:
Features
● Multi-Source Package with Duplex LC Connector
● Up to 155Mb/s Data Links
● Up to 10km on 9/125µm SMF
● Single +3.3V Power Supply
● Hot-Pluggable
● Compliant with Specifications for ITU-T G.957, G.958
● Eye Safety Designed to Meet Laser Class1, Compliant with IEC60825
● Monitoring Interface Compliant with SFF-8472
● Compliant with Bellcore TA-NWT-000983
● Operating Case Temperature
Standard(X=1):0℃~+70℃
Industrial(X=2):-40℃~+85℃
● RoHS Compliant Products
Receiver
| Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
| Date Rate |
B |
- |
155 |
- |
Mb/s |
| Receive Sensitivity*Note3 |
Pmin |
- |
- |
-28 |
dBm |
| Maximum Input Power |
Pmax |
-8 |
- |
- |
dBm |
| Signal Detect Threshold-De-Assert |
SD |
|
|
-30 |
dBm |
| Signal Detect Threshold-Assert |
SA |
-45 |
|
|
dBm |
| Hysteresis |
- |
|
2.0 |
|
dB |
| Supply Current |
ICC |
- |
60 |
120 |
mA |
| Operating Wavelength |
λc |
1100 |
- |
1620 |
nm |
| Alarm Output Interface |
LVTTL |
||||
Note1: Measured with 9/125µm single-mode fiber.
Note2:Filtered, measured with a PRBS 2^23-1 test pattern @155Mbps.
Note3: Measured with ER=8.2dB, 2^23-1 PRBS data pattern, BER≤1E-12.
Absolute Maximum Ratings: (TC=25℃)
| Parameter |
Symbol |
Min. |
Max. |
Unit |
|
| Storage Temperature |
TST |
-40 |
+85 |
℃ |
|
| Operating Temperature |
X=1 |
TIP |
0 |
+70 |
℃ |
|
X=2 |
-40 |
+85 |
|||
| Input Voltage |
TCC |
0 |
+3.6 |
V |
|
Recommended Operating Environment
| Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
|
|
Supply Voltage |
VCC |
+3.0 |
+3.3 |
+3.6 |
V |
|
| Operating Temperature |
X=1 |
TOP |
0 |
- |
+70 |
℃ |
|
X=2 |
-40 |
- |
+85 |
|||
Timing Characteristics
| Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
|
TX_DISABLE Assert Time |
t_off |
|
3 |
10 |
usec |
|
TX_DISABLE Negate Time |
t_on | 0.5 | 1 | msec | |
|
Time to Initialize Include Reset of TX_FAULT |
t_int | 30 | 300 | msec | |
|
TX_FAULT from Fault to Assertion |
t_fault |
|
20 |
100 |
usec |
|
TX_DISBEL Time to Start Reset |
t_reset |
10 |
|
|
usec |
|
Receiver Loss of Signal Assert Time (Off to On) |
Ta,RX_LOS |
|
|
100 |
usec |
|
Receiver Loss of Signal Assert Time (On to Off) |
Td,RX_LOS |
|
|
100 |
usec |
Product detail pictures:
Related Product Guide:
With our excellent administration, strong technical capability and strict excellent control method, we carry on to offer our clients with responsible good quality, reasonable costs and great companies. We intention at becoming considered one of your most responsible partners and earning your pleasure for China Factory for Sfp Dual Core - 100BASE-LX SFP 1310nm 10km Hi-Optel HSFP-03-3312S-22F module – Hi-optel , The product will supply to all over the world, such as: Sao Paulo, Malawi, Provence, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Henry stokeld from Mozambique - 2018.08.12 12:27
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Afra from Belgium - 2018.06.30 17:29
