High Quality for Cwdm 10g Sfp+ - 10GBASE-BX SFP+ 1270nm-TX 1330nm-RX 10km Hi-Optel HB10-3732112 module – Hi-optel

Description

The transceiver consists of two sections: The high performance a 1270nm DFB Laser. Transmitter and high sensitivity PIN integrated with a TIA. Receiver.

The module is hot pluggable into the 20-pin connector. The high-speed electrical interface is based on low voltage logic, with nominal 100 Ohms differential impedance and AC coupled in the module. The optical output can be disabled by LVTTL logic high-level input of TX_Disable. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal of receiver. The receiver RATE_SELECT pin is not used by the transceiver.

A 2-wire interface (SCL, SDA) is used for serial ID, digital diagnostics and other control /monitor functions.

Features

● Hot pluggable
● 10Gb/s serial optical interface
● CWDM DFB Laser and PIN receiver
● Up to 10km on 9/125um SMF
● SFP+ MSA package with duplex LC connector
● 2-wire interface for management and diagnostic monitor
● SFI High Speed Electrical Interface
● Very low EMI and excellent ESD protection
● +3.3V single power supply
● Power consumption less than 1.0W
● Operating case temperature: -40~+85℃

Applications

● LTE optical repeater application,other optical links
● 10G Base- LR/LW
● Other optical links

Standard

● Compliant with SFF-8431 and SFF-8432
● Compliant with SFF-8472 Rev 10.2
● Compliant with IEEE 802.3ae 10GBASE-LR and 10GBASE-LW
● RoHS Compliant

Absolute Maximum Ratings

Absolute Maximum Ratings: (TC=25℃)

Recommend Operation Environment