Manufacturer for Cwdm Module - 100BASE-ZX SFP 1550nm 80km Hi-Optel HSFP-03-1521S-22F module – Hi-optel
Manufacturer for Cwdm Module - 100BASE-ZX SFP 1550nm 80km Hi-Optel HSFP-03-1521S-22F module – Hi-optel Detail:
Features
● Multi-Source Package with Duplex LC Connector
● Up to 155Mb/s Data Links
● Up to 80km on 9/125µm SMF
● Single +3.3V Power Supply
● Hot-Pluggable
● Compliant with Specifications for ITU-T G.957, G.958
● Eye Safety Designed to Meet Laser Class1, Compliant with IEC60825
● Monitoring Interface Compliant with SFF-8472
● Compliant with Bellcore TA-NWT-000983
● Operating Case Temperature
Standard(X=1):0℃~+70℃
Industrial(X=2):-40℃~+85℃
● RoHS Compliant Products
Pin Description
|
Pin |
Symbol |
Name/Description |
Ref |
|
1 |
VEET |
Transmitter Ground(Common with Receiver Ground) |
1 |
|
2 |
TFAULT |
Transmitter Fault.Low normal operation,High Fault indication | |
|
3 |
TDIS |
Transmitter Disable.Laser output disabled on high or open |
2 |
|
4 |
MOD_DEF(2) |
Module Definition 2.Data line for Serial ID |
3 |
|
5 |
MOD_DEF(1) |
Module Definition 1.Clock line for Serial ID |
3 |
|
6 |
MOD_DEF(0) |
Module Definition 0.Grounded within the moudle |
3 |
|
7 |
Rate Select |
No connection required | |
|
8 |
LOS |
Loss of Signal indication.Logic 0 indicates normal operation. |
4 |
|
9 |
VEER |
Receiver Ground(Common with Transmitter Ground) |
1 |
|
10 |
VEER |
Receiver Ground(Common with Transmitter Ground) |
1 |
|
11 |
VEER |
Receiver Ground(Common with Transmitter Ground) |
1 |
|
12 |
RD- |
Receiver Inverted DATA out.AC Coupled | |
|
13 |
RD+ |
Receiver Non-inverted DATA out.AC Coupled | |
|
14 |
VEER |
Receiver Ground(Common with Transmitter Ground) |
1 |
|
15 |
VCCR |
Receiver Power Supply | |
|
16 |
VCCT |
Transmitter Power Supply | |
|
17 |
VEET |
Transmitter Ground(Common with Receiver Ground) |
1 |
|
18 |
TD+ |
Transmitter Non-inverted DATA in.AC Coupled | |
|
19 |
TD- |
Transmitter Inverted DATA in.AC Coupled | |
|
20 |
VEET |
Transmitter Ground(Common with Receiver Ground) |
1 |
Notes:
1. Circuit ground is internally isolated from chassis ground.
2. Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
3. Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V.
MOD_DEF(0) pulls line low to indicate module is plugged in.
4. LOS is open collector output. Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
Digital Diagnostic Monitor Characteristics
|
A2h address |
Parameter |
Calibration |
Accuracy |
Unit |
|
96-97 |
Temperature |
Internal |
+/- 3 |
℃ |
|
98-99 |
Vcc |
Internal |
+/- 3% |
V |
|
100-101 |
Tx bias |
Internal |
+/- 10% |
mA |
|
102-103 |
Tx power |
Internal |
+/- 3 |
dB |
|
104-105 |
Rx Power |
Internal |
+/- 3 |
dB |
Product detail pictures:
Related Product Guide:
Our pursuit and company intention is usually to "Always fulfill our purchaser requirements". We go on to acquire and layout excellent high quality products for both our previous and new consumers and realize a win-win prospect for our customers too as us for Manufacturer for Cwdm Module - 100BASE-ZX SFP 1550nm 80km Hi-Optel HSFP-03-1521S-22F module – Hi-optel , The product will supply to all over the world, such as: Oslo, Kenya, Norwegian, we have all day online sales to make sure the pre-sale and after-sale service in time. With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
By Jamie from Switzerland - 2017.03.08 14:45
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Mignon from Malaysia - 2018.06.03 10:17
