Products
-
400G QSFP-DD LR4
The 400G QSFP-DD LR4 is a transceiver module designed for 10 km optical communication applications. This module can convert 8-channel 53.125 Gbps electrical data to 4-channel 106.25 Gbps optical signals, and multiplex them into a single channel for 425 Gbps optical transmission. Similarly, it optically de-multiplexes a 425 Gbps input into 4-channel signals, and converts them to 8-channel output electrical data on the receiver side. The module incorporates 4 independent channels on CWDM4 1271/... -
400G QSFP-DD FR4
The 400G QSFP-DD FR4 is a transceiver module designed for 2 km optical communication applications, and it is compliant with 100G Lambda MSA standard. This module can convert 8-channel 53.125 Gbps electrical data to 4-channel 106.25 Gbps optical signals, and multiplex them into a single channel for 425 Gbps optical transmission. Similarly, it optically de-multiplexes a 425 Gbps input into 4-channel signals, and converts them to 8-channel output electrical data on the receiver side. -
400G QSFP-DD DR4
400G QSFP-DD DR4 is a transceiver module designed for 500 m optical communication applications, and it is compliant with QSFP-DD MSA, IEEE 802.3-2018 400GBASE-DR4 and 400GAUI-8 standards. The 425 Gigabit signal is carried over four parallel lanes by one wavelength per lane. This module can convert 8-channel 53.125 Gbps electrical data to 4 parallel channels of optical signals, each supporting 106.25 Gbps data transmission. Reversely, it can convert 4-channel 106.25 Gbps optical signals to 8-c... -
400G QSFP-DD AOC
400G QSFP-DD AOC is active cable for optical communication applications, and it is compliant with QSFP-DD MSA, IEEE 802.3cd and 400GAUI-8 standards. -
10GBASE-ZR SFP+ 1550nm 120km Hi-Optel HSFP10-0550-120 module
l Up to 11.3Gb/s data links
l 1550nm EML transmitter and APD receiver
l Up to 120km on 9/125µm SMF
l Hot-pluggable SFP+ footprint
l Support Digital Monitoring interface
l Single +3.3V power supply
l Compliant with SFF+MSA and SFF-8472
l Metal enclosure, for lower EMI
Case operating temperature Commercial: 0 ~ +70oC
-
100G-QSFP28-ZR4
Hi-Optel’s HQSFP28-DL8 is designed for 80km optical communication applications. Thismodulecontains 4-lane optical transmitter, 4-lane optical receiver and module management block including2wire serial interface. The optical signals are multiplexed to a single-mode fiber throughanindustrystandard LC connector.
-
100G-QSFP28-ER4
Hi-Optel’s HQSFP28-5L8 module module is designed for 40km optical communication applications.This module contains 4-lane optical transmitter, 4-lane optical receiver and module management blockincluding 2 wire serial interface. The optical signals are multiplexed to a single-mode fiber throughanindustry standard LC connector
-
25GBASE-ER SFP28 1310nm 40km Hi-Optel HSFP28-1351 Module
HSFP28-1351 is SFP28 ER module for duplex optical data communications support 25.78 Gb/s 40Km data links. The transmitter section uses a high performance 1310nm EML and the receiver is an Avalanche Photodiode (APD) mounted in an optical header and a limiting post-amplifier IC.
-
10GBASE-BX SFP+ 1490nm-TX 1550nm-RX 80km Hi-Optel HB10-0455111 Module
HB10-0455111 is a very compact 10.3125Gb/s optical transceiver module for serial optical communication applications, supporting data-rate of 10.3125Gbps (10GBASE-ZR), and transmission distance up to 80 km on SMF.
-
10GBASE-BX SFP+ 1550nm-TX 1490nm-RX 80km Hi-Optel HB10-0545111 Module
HB10-0545111 is a very compact 10.3125Gb/s optical transceiver module for serial optical communication applications, supporting data-rate of 10.3125Gbps (10GBASE-ZR), and transmission distance up to 80 km on SMF.
-
25GBASE-SR SFP28 850nm 100m Hi-Optel HSFP28-3831 module
HSFP28-3831 is SFP28 module, which is designed for use in 25Gb/s data rate over multimode fiber. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. It has built-in dual clock and data recovery (CDR).
-
1000BASE-BX SFP 1490nm-TX 1550nm-RX 70km Hi-Optel HWTR-24-045278133F module
Gigabit Ethernet
1x Fiber Channel
Switch to Switch Interface
Router/Server Interface
Other Optical Links
-
100BASE-LX SFP 1310nm 10km Hi-Optel HSFP-03-3312S-22F module
STM-1
Fiber Channel
SDH/SONET
ATM Switches
Other Optical Links
-
100GBASE-CWDM4 QSFP28 1310nm 2km Hi-Optel HQSFP28-6C2 module
The QSFP28 CWDM4 module is a 100Gb/s optical transceiver module for serial optical communication applications. The design is compliant to IEEE P802.3bm standard, and transmission distance up to 2Km on G.652 SMF. Digital diagnostics functions are available via an I2C interface as specified by the SFF-8436 QSFP+ MSA.
-
2.5GBASE-BX SFP 1550nm-TX 1310nm-RX 40km Hi-Optel HWTR-48-153278133F module
SDH/SONET
WDM Application
2x Fiber Channel
Gigabit Ethernet
Other Optical Links
-
100GBASE-SR4 QSFP28 850nm 100m Hi-Optel HQSFP28-381 Module
The QSFP28 SR4 module is a 100Gb/s optical transceiver module for serial optical communication applications, the design is compliant to 100GBASE-SR4 of the IEEE P802.3ba standard, and transmission distance up to 70m on OM3 MMF and 100m on OM4 MMF. Digital diagnostics functions are available via an I2C interface as specified by the SFF-8436 QSFP+ MSA.